RCDC-1

1 Channel, 1 Device, Momentary or Latched

For picture, specs and prices click HERE



RCDC-2

Uses 1 or 2 Channels
Can control 2 devices (2 channels) or 1 motor (1 channel)
Momentary or Latched

For picture, specs and prices click HERE

 

RCDC-3

Up to 3 Channels used
Can control 3 Devices (3 channels) or
1 Motor & 1 Device (2 channels)
Momentary or Latched

For picture, specs and prices click HERE

 

RCDC-4

Uses up to 3 channels
Up to 3 devices using 1 channel per device
1 motor & 2 devices (3 channels)
Momentary or Latched

For picture, specs and prices click HERE

Radio Control Transmitter and Receiver Sets

Here are the transmitter and receiver sets you need to control your robots. They operate in the 75 MHz surface frequency band so you won't get in trouble with the FCC and some model airplane enthusiast for crashing his plane by operating a 72 MHz system commonly available in most hobby shops.

For picture, specs and prices click HERE

An Inexpensive Robot Tester

If you think you might need technical service at some time in the future, this device is a "must-have" to supply the details that will be needed.

This multi-tester is an invaluable tool for testing your robot's circuits. You can:

• Check for continuity
• Check for bad grounds
• Check for blown fuses
• Check your battery voltage
• Check to see if your charger is working
• Check to see if one of your batteries is dead
• Much more

For picture, specs and prices click HERE

Radio Controlled Device Controllers