RCIC-1

A single channel radio control interface that accepts a standard 1 to 2 ms RC pulse from one RC channel and converts it to a PWM signal for speed control and logic level signals for forward/reverse control of an MC7 motor controller. You can use one of these on each of 2 MC7's to control motor direction & speed with 2 joysticks for tank-like steering.

For picture, specs and prices click HERE



RCIC2_SC

A dual channel radio control interface with mixing. This interface lets you control speed & direction with one dual axis joystick. It accepts standard 1 to 2 ms RC pulses from each of 2 RC channels and converts them to PWM signals for speed control and logic level signals for forward/reverse control of each of two MC7 motor controllers. It has a self-calibrating feature which allows you to begin with your RC transmitter trim controls set at center position regardless of whether the transmitter has been mis-calibrated, or has deviated because of aging, from the 1.5 ms joystick-at center "standard".

For picture, specs and prices click HERE

 

JSIC

This joystick controlled interface comes in 2 different models: The JSIC is a dual channel joystick controlled interface with mixing. This interface lets you control speed & direction of two motors with one dual axis joystick and two MC7 controllers. No radio control equipment is necessary. It accepts a standard IBM compatible analog joystick input which uses a 100K potentiometer (most analog joysticks do) and converts the joystick movements to PWM signals for speed control and logic level signals for forward/reverse control of each of two MC7 motor controllers.

The JSIC_SEP is the same interface programmed with NO MIXING for those of you who aren't steering robots but would like to do neat things like remotely control the pan and tilt of a camera or a satellite dish. One axis of a joystick controls one motor while the other axis controls a second motor without interaction. Great for pan and tilt operations.

Please specify which software you want when ordering. If not specified, the standard software with mixing will be provided.

For picture, specs and prices click HERE